DSP controller RichAuto A11

Product Description

Description

The AutoNow A11 DSP controller is built on the basis of the 8-core SPARTAN-6 processor provides fast operation and automatic control of milling in three axes at high speed. The controller is completely autonomous and does not require a PC connection. The control system uses standard G-codes and HPGL-3D codes, which allows you to generate tasks using the most common software packages: ArtCam, Type3, Pro-E, MasterCAM, UG, CAXA, etc.

DSP controller has flash memory, USB interface, precision programmable interface, built-in DSP processor (32 bit).

The controller is equipped with 512 MB non-volatile memory.

Parameters:

• Does not require a PC connection
• Main processor-XILINX SPARTAN-6LX4
• Number of processor cores-8
• Processor DSP-DSP TMS 320
• The amount of internal memory-512MB
• Display resolution-124x64
• Screen-LCD
• Connecting storage devices - USB, SD
• File format-G-code
• Number of axes-3
• Connectable stepper/servo motors
• Interpolation - linear, curvilinear
• Interface language-English,Chinese
• Menu control - 16 buttons
• Power off protection - yes
• Working coordinates - 9 independent coordinates
• The maximum pulse frequency is 1m/s
• Control signal - differential signal
• The minimum resolution is 0.001mm
• Change of speed (working, spindle) during operation
• Working temperature - from 0 to +70C
• Power-24V
• Consumption-2W
• Size, mm-150x110x38

Equipment:

• DSP controller A11
• Connection cable
• USB cable (Remote-PC)
• Interface board A1X