Driver of a stepper motor 2DM2280 (8,2A)

Product Description

Description

The 2DM2280 digital stepper motor drive adopts the latest 32-bit DSP control technology, the user can set any microstep range within the rated current, thanks to the built-in micro technology, the 2DM2280 driver performance is greatly improved and the step division noise is reduced. The function of automatic tuning of internal parameters is integrated, and it is also possible to adjust the optimal operating parameters automatically for different engines to maximize performance.

Parameters

• Power supply 220v (variable)
• Phase current 1.1..8.2A
• Micro step 1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
  1/5, 1/10, 1/25, 1/50, 1/125, 1/250
• Protection: overload, switch to 1/2 current on connection error
• Hold mode (50% current in the absence of signals for half a second)
• Driver dimensions 192 x 85 x 140 mm

Selecting the operating mode:

• The operating mode is switched by switches SW1..SW8 installed at the end of the driver.
• Switches SW1..SW4 are responsible for selecting the current
• Switches SW5..SW8 microstep selection.
• The value corresponds to the modes - the position of the switches is indicated on the driver